Diy led part 2

Today I had time to continue led build. Now was the time for some screw driving and soldering.

Leds screwed in with nylon washers and Arctic Silver thermal compound.

Wires soldered.It was hard to solder because the heat transmission to heatsink.

I decided to have 4 channels for leds so extra channel for green led. I tested the led strings with buckpuck driver and everything was ok. Still need two more LDD-700H drivers to continue this build (waiting items from fleabay supplier). 

Next phase is to complete drivers board. The driver PWM controller board and software is ready and I will post blog about it when its closure build is completed.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s